New Feature                                               Need help? Try our Zyxel Search AI feature Try Now!

[CPE] CenturyLink PK-5001z Bridging Instructions (Transparent Mode) DSL CPE icon

Avatar
Matt
  • Updated

Connect your PC to one of the 4 LAN ports on the PK-5001z via an Ethernet cable.

Once this is achieved, configure your TCP/IP settings and set your computer's IP address statically to 192.168.0.x (Do not choose 192.168.0.1 as that is the router’s address)

bridging-the-pk.001.png

bridging-the-pk.002.png

After the IP address is set, open up a web browser and type in the address of http://192.168.0.1 in the address bar and press enter

bridging-the-pk.003.png

The PK-5001z login page will appear.

bridging-the-pk.004.png

Look on the bottom of the router for the login information and enter it in on the login screen

bridging-the-pk.005.png

Once logged in click on Advanced to get to the advanced configuration  menu

bridging-the-pk.006.png

On the Advanced Setup Menu, click on Broadband Settings

bridging-the-pk.007.png

Under the Broadband Settings, ensure that Encapsulation is set to LLC Based and that the VPI/VCI settings match what Century Link has supplied.

bridging-the-pk.008.png

Apply these settings and then click on WAN Settings

bridging-the-pk.009.png

This brings up the WAN Settings Menu.

For the ISP Protocol chose Transparent Bridging and click apply

bridging-the-pk.010.png

Finally, change the IP back automatically obtain an IP address

bridging-the-pk.011.png

Related articles

Comments

0 comments

Please sign in to leave a comment.