Nebula [AP] - Basic WiFi-Setup (SSID) on Access Points

Starting the process of establishing a WiFi network in Nebula begins with step: configuring an SSID. The SSID represents the network that is actively being transmitted. This guide assists you in configuring an SSID for your Nebula devices, complete with the basic settings. 

• Log in to your Nebula account: http://nebula.zyxel.com
• Make sure the devices you want to use are registered

Go to Site-wide -> Configure -> WiFi SSID settings

• Click "Add SSID network" to add a new SSID or change the settings of an existing SSID
• Set up a "Name" and "Enable" the SSID
• Click "Save"

• The next step is to configure the authentication settings (i.e. setting the WPA2 pre-shared key or leaving the security open)
  

Go to Site-wide -> Configure -> Access points -> SSID advanced settings

• Select the SSID you are interested in from the list
• Set up the required security level and set the password
• Click "Save" and make sure you save all your changes
• The SSID should be visible now and ready to accept your client’s connection requests!